[Lcdproc] output problem with Matrix Orbital LK202-25 at Version 0.5.0

[RavensWorld@gmx.de]

I compiled the latest CVS version.
If I using the 'curses'-Driver it works. I see the info-screen at shell,
can connect via telnet and get the right output.
lcdproc-client works, too.
If I using the MtxOrb-Driver it doesn't works. I always get no output.
no info-screen - no digits on display.
In debug-mode. It looks all correct.
Maybe a problem with the driver?! Maybe someone can post a config who is working correct for MtxOrb.
Or I have to compile the sources with special ./configure -parameters?

thanks for your help.


-------- Original-Nachricht --------
Datum: Thu, 14 Sep 2006 17:53:07 +0200
Von: "Black Soul" <RavensWorld@gmx.de>
An: lcdproc@lists.omnipotent.net
Betreff: Re: [Lcdproc] output problem with Matrix Orbital LK202-25 at Version 0.5.0

> hi list,
> 
> If I had startet daemon I see now infoscreen, only a blank screen with
> backlight on.
> 
> Its an good idee of you, using the latest CVS version.
> I hope it will works.
> 
> thx
> -------- Original-Nachricht --------
> Datum: Thu, 14 Sep 2006 17:38:39 +0200
> Von: Peter Marschall <peter@adpm.de>
> An: lcdproc@lists.omnipotent.net
> Betreff: Re: [Lcdproc] output problem with Matrix Orbital LK202-25 at
> Version 0.5.0
> 
> > On Thursday, 14. September 2006 11:15, RavensWorld@gmx.de wrote:
> > > I am trying to work with an Matrix Orbital LK202-25 at Version 0.5.0.
> > >
> > > I connect via telnet localhost 13666 on the LCDd service.
> > > - init a new screen via screen_add command
> > > - making some settings via screen_set
> > > - init a new widget via widget_add
> > > - set the widget via widget_set --> and I got no output on LCD
> > > I have done the same under version 0.4. and I got an output.
> > 
> > Does the display show the Server screen after startung up ?
> > On a 4 line display it should look like
> > 	## LCDproc Server ##
> > 	Clients: 0
> > 	Screens: 0
> > With 2-line displays the last two lines are combined into one
> > with the texts a bit abbreviated.
> > 
> > If it does, the server seems to work O.K.
> > If it doesn't, what does the server say when being started with
> > the options -f1 -r5 -s0
> > 
> > If it still does not work, next thing to try is the nightly tar ball
> from
> > CVS.
> > 
> > Hope it helps
> > Peter
> > 
> > -- 
> > Peter Marschall
> > peter@adpm.de
> > _______________________________________________
> > LCDproc mailing list
> > LCDproc@lists.omnipotent.net
> > http://lists.omnipotent.net/mailman/listinfo/lcdproc
> 
> -- 
> "Feel free" - 10 GB Mailbox, 100 FreeSMS/Monat ...
> Jetzt GMX TopMail testen: http://www.gmx.net/de/go/topmail
> _______________________________________________
> LCDproc mailing list
> LCDproc@lists.omnipotent.net
> http://lists.omnipotent.net/mailman/listinfo/lcdproc

-- 
"Feel free" - 10 GB Mailbox, 100 FreeSMS/Monat ...
Jetzt GMX TopMail testen: http://www.gmx.net/de/go/topmail