[Lcdproc] eyebox driver : blinking backlight

[Robert Buchholz]

Hey,

qube wrote:
> I cannot chose my info screens, command line switches (eg "lcdproc C")
> have no effect, I always get the same screens pattern (clock, mem, cpu
> etc...)

Noticed this, too.


> I also noticed that my backlight is blinking at random times (tested it
> on original OS with no problem) it seem that some data hit the light
> control

Quoting Peter from [1]:
"If you are using the "Load" screen in the lcdproc client, this is
probably not a bug but a feature.

Depending on the load the backlight is switched on, off or blinking.
This is controlled by the compile time definitions LOAD_MIN and
LOAD_MAX in config.h"

Bye,

Robert

[1] http://thread.gmane.org/gmane.comp.sysutils.lcdproc/10962/focus=10962