[Lcdproc] CF634 bigclock

[Richard van den Berg]

Sorry for the delay, but I just tried LCDd version CVS-current-20060801
on my CF634 in combination with the BigClock command of lcdproc (also
from CVS).

The big clock works when NewFirmware is set to "no". When set to "yes"
all I get is a bunch of accentuated vowels.

Does this mean my CF634 does not have new firmware? How can I tell?
/proc/bus/usb/devices says:

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0403 ProdID=fc09 Rev= 2.00
S:  Manufacturer=Crystalfontz
S:  Product=Crystalfontz CFA-634 USB LCD
S:  SerialNumber=CF000623
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=490mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

Sincerely,

Richard van den Berg